Control one or more linear actuators with a rocker switch
Description:
This is how you would wire a linear actuator with a DPDT rocker switch.
STEP1
- Put short jumpers so that the bottom left pin is connected to the top right pin. And for the bottom right pin to have a jumper to the top left pin.
This is how the power polarity gets reversed when you move the switch in either direction.
Images
Control one or more linear actuators with a rocker switch
Project By: Newt
Cost: $18
Time: 0 hours
Skill level: very easy
Category: Actuator controls
Tags: actuator,switch,motor control
Viewed: 1451 times
Website: http://www.firgelliauto.com
Find Parts for this project:
Other Actuator controls Projects
Comments
Add comment
<< Previous Page
|
Next Page >>